Flight Controller and ESC Spare Parts

Multiple Frequency Flight Controller + ESC

At AEGIS JAPAN, we offer reliable UAV flight controller and ESC spare parts for professional drone projects. These components are essential for stable operation in security, agriculture, industrial inspection, and environmental monitoring.

Our multi-frequency flight controllers integrate ESC functions, reducing wiring complexity and enhancing efficiency. With strong anti-jamming and anti-drone ability, they deliver safe performance even in complex environments.

The ESC spare parts feature precise motor control, high current capacity, and intelligent protections against overheating, overcurrent, and low voltage. Merged with flight controllers, they guarantee seamless compatibility and long-term reliability.

F4 STM32 flight controller board with ARM chip and multiple connection ports for UAV drones, AEGIS JAPAN spare part

F405 30.5×30.5 Flight Controller
MCU: STM32F405
IMU(Gyro): MPU6500
Black box: TF CARD
OSD: Beta Flight OSD (AT7456E chip)
Barometer: bmp280
USB Port : Type-C
cameras: CAM1
Power Input: 3S – 6S Lipo
BEC Output: 5V output, the total current load is 3A, 9V output, the total current

load is 2.5A UART : 3 sets

ESC Signal: M1 -M6
LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: OMNIBUSF4SD
Mounting: 30.5×30.5mm (4mm hole diameter)
Dimension：36(L)x36(W)x7(H)mm
Weight: 7g

F7 STM32 flight controller board with USB-C port, multiple I/O pins, and advanced UAV spare part by AEGIS JAPAN

F722 30.5×30.S Flight Controller

MCU: STM32F722
IMU(Gyro): ICM42688p
Black box : 16M Black Box
OSD : Beta Flight OSD (AT7456E chip)
Barometer: SPL06
USB Port : Type-C
DJ I Air Unit connector: YES
Dual cameras: VES (Default: CAM1)
Power Input: 3S – 6S Lipo
BEC Output: 5V output, the total current load is 3A, 10V output, the total current load is 2.5A

UART : 6 sets ESC Signal: Ml1-M8
12C: YES (SDA & SCL pads can be used for magnetometer) LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: AXISFLYINGF7PRO
Mounting: 30.5×30.5mm (4mm hole diameter)
Dimension：36(L)x36(W)x7(H)mm
Weight: 7g

High-performance UAV ESC board with multiple MOSFETs and power distribution design for drone motor control, AEGIS JAPAN spare part

BLS 60A 30.5×30.5 4-in-1 ESC
MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Power Input: 3-6S LiPo
Continuous Current: 60A* 4
Burst Current: 65A(1O seconds)
Current Sensor Scale: 200
ESC Protocol: DSHOT300/600
Firmware: M_H_30_REV16_7
Mounting :30.5×30.Smm( 4mm hole diameter)
Dimension：44.5(L) x43(W) x6.3(H)mm
Weight：13.5g

Stacked UAV flight controller with ESC integration, USB-C port, and red vibration dampers for drone stability, AEGIS JAPAN spare part

F405 Flight Contoller + 60A 4-in-1 ESC
MCU: STM32F405
IMU(Gyro): ICM42688p
Black box : TF CARD
OSD :Beta Flight OSD ( AT7456E chip)
Barometer: SPL06
USB Port : Type-C
cameras: CAM1
Power Input: 3S – 6S Lipo
BEC Output: 5V output, the total current load is 3A, 9V output, the total current load is 2.5A

UART : 3 sets

ESC Signal: M1 -M6
LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: OMNIBUSF4SD BLS 60A 30.5×30.5 4-in-1 ESC
MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Continuous Current: 60A* 4
Burst Current: 65A(1O seconds)
Current Sensor Scale: 200
ESC Protocol :DSHOT300/600
Firmware: M_H_30_REV16_7
Mounting :30.5×30.Smm(4mm hole diameter)
Dimension: 44.5(L)x43x(W)x6.3mm(H)
Weight：23.5g

Compact UAV flight controller with USB-C port, ARM processor, and dual-layer design for drone stability, AEGIS JAPAN spare part

F722 30.5×30.S Flight Controller +60A 30.5×30.5 4-in-1 ESC
MCU: STM32F722
IMU(Gyro): ICM42688p
Black box :16M Black Box
OSD :Beta Flight OSD ( AT7456E chip)
Barometer: SPL06
USB Port : Type-C
DJ I Air Unit connector: YES
Dual cameras: VES (Default: CAM1)
BEC Output: 5V output, the total current load is 3A, 10V output, the total current load is 2.5A

UART : 6 sets
12C: YES (SDA & SCL pads can be used for magnetometer)

LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: AXISFLYINGF7PRO BLS 60A 30.5×30.5 4-in-1 ESC
MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Power Input: 3-6S LiPo
Continuous Current: 60A* 4
Burst Current: 65A(1O seconds)
Current Sensor Scale: 200
ESC Protocol:DSHOT300/600
Firmware: M_H_30_REV16_7
Mounting:30.5×30.Smm( 4mm hole diameter)
Dimension：44.5(L)x43(W)x6.3mm(H)
Weight：23.5g

UAV flight controller board with ARM microcontroller, multiple I/O pins, and power distribution interface, AEGIS JAPAN spare part

F405 30.5×30.5 Flight Controller
MCU: STM32F405
IMU(Gyro): ICM42688p
Black box: 16M Black Box
OSD :Beta Flight OSD ( AT7456E chip)
Barometer: selectable
USB Port: Type-C
DJ I Air Unit connector: YES
Dual cameras: VES (Default: CAM1)
Power Input: 3S – 8S Lipo
BEC Output: 5V output, the total current load is 3A, 12V output, the total current load is 2.5A

UART : 5 sets

ESC Signal: Ml -M8
12C: YES (SDA & SCL pads can be used for magnetometer)

LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: STM32F405
Mounting: 30.5×30.5mm (4mm hole diameter)
Dimension: 36(L)x36(W)x7(H)mm
Weight: 7g

F722 30.5×30.S Flight Controller
MCU: STM32F722
IMU(Gyro): ICM42688p
Black box:16M Black Box
OSD: Beta F light OSD (AT7456E chip)
Barometer: selectable
USB Port: Type-C
DJI Air Unit connector: YES
Dual cameras: VES (Default: CAM1)
Power Input: 3S – 8S Lipo
BEC Output: 5V output, the total current load is 3A, 12V output, the total current load is 2.5A

UART: 5 sets

ESC Signal: Ml -M8
12C: YES (SDA & SCL pads can be used for magnetometer)

LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: STM32F722
Mounting: 30.5 x 30.5mm (4mm hole diameter)
Dimension：36(L) x36(W) x 7(H)mm
Weight: 7g

High-efficiency 4-in-1 UAV ESC board with MOSFET circuits for precise drone motor control, AEGIS JAPAN spare part

BLS 55A 30.5×30.5 4-in-1 ESC
MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Power Input: 3-6S LiPo
Continuous Current: 55A* 4
Burst Current: 65A(1O seconds)
Current Sensor Scale: 200
ESC Protocol: DSHOT300/600
Firmware: Q_H_30 24k
Mounting: 30.5×30.Smm( 4mm hole diameter)
Dimension：44.5(L)x43(W)x6.3mm(H)
Weight：13.5g

BLS 60A 30.5×30.5 4-in-1 ESC
MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Power Input: 3-8S LiPo
Continuous Current: 60A* 4
Burst Current: 65A(1O seconds)
Current Sensor Scale: 200
ESC Protocol: DSHOT300/600
Firmware: Q_H_30 24k
Mounting: 30.5×30.Smm( 4mm hole diameter)
Dimension：44.5(L)x43(W)6.3mm(H)
Weight：13.5g

Stacked UAV flight controller with ESC integration, capacitor, and XT60 power connector for stable drone performance, AEGIS JAPAN spare part

F405 30.5×30.5 Flight Controller
MCU: STM32F405
IMU(Gyro): ICM42688p
Black box :16M Black Box
OSD :Beta Flight OSD ( AT7456E chip)
Barometer: selectable
USB Port : Type-C
DJI Air Unit connector: YES
Dual cameras: VES (Default: CAM1)
BEC Output: 5V output, the total current load is 3A, 12V output, the total current load is 2.5A

UART : 5 sets

12C: YES (SDA & SCL pads can be used for magnetometer)

LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: STM32F405 BLS

55A 30.5×30.5 4-in-1 ESC
MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Power Input: 3-6S LiPo
Continuous Current: 55A* 4
Burst Current: 65A(10 seconds)
Current Sensor Scale: 200
ESC Protocol: DSHOT300/600
Firmware: Q_H_30 24k

F722 30.5×30.5 Flight Controller
MCU: STM32F722
IMU(Gyro): ICM42688p
Black box :16M Black Box
OSD: Beta Flight OSD ( AT7456E chip)
Barometer: selectable
USB Port: Type-C
DJI Air Unit connector: YES
Dual cameras: VES (Default: CAM1)
BEC Output: 5V output, the total current load is 3A, 12V output, the total current load is 2.5A

UART : 5 sets

12C: YES (SDA & SCL pads can be used for magnetometer)

LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: STM32F722 BLS

55A 30.5×30.5 4-in-1 ESC
MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Power Input: 3-8S LiPo
Continuous Current: 55A* 4
Burst Current: 65A(1O seconds)
Current Sensor Scale: 200
ESC Protocol: DSHOT300/600
Firmware: Q_H_30 24k

F405 30.5×30.5 Flight Controller
MCU: STM32F405
IMU(Gyro): ICM42688p
Black box: 16M Black Box
OSD: Beta Flight OSD (AT7456E chip)
Barometer: selectable
USB Port: Type-C
DJI Air Unit connector: YES
Dual cameras: VES (Default: CAM1)
BEC Output: 5V output, the total current load is 3A, 12V output, the total current load is 2.5A

UART: 5 sets

12C: YES (SDA & SCL pads can be used for magnetometer)

LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: STM32F405 BLS

60A 30.5×30.5 4-in-1 ESC
MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Power Input: 3-8S LiPo
Continuous Current: 60A* 4
Burst Current: 65A(10 seconds)
Current Sensor Scale: 200
ESC Protocol: DSHOT300/600
Firmware: Q_H_30 24k

F722 30.5×30.5 Flight Controller
MCU: STM32F722
IMU(Gyro): ICM42688p
Black box: 16M Black Box
OSD: Beta Flight OSD ( AT7456E chip)
Barometer: selectable
USB Port: Type-C
DJI Air Unit connector: YES
Dual cameras: VES (Default: CAM1)
BEC Output: 5V output, the total current load is 3A, 12V output, the total current load is 2.5A

UART : 5 sets

12C: YES (SDA & SCL pads can be used for magnetometer)

LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: STM32F722 BLS

60A 30.5×30.5 4-in-1 ESC
MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Power Input: 3-8S LiPo
Continuous Current: 60A* 4
Burst Current: 65A(10 seconds)
Current Sensor Scale: 200
ESC Protocol: DSHOT300/600
Firmware: Q_H_30 24k

UAV flight controller with integrated ESC, capacitor, and XT60 power connector for reliable drone motor control, AEGIS JAPAN spare part

F405 30.5×30.5 Flight Controller
MCU: STM32F405
IMU(Gyro): ICM42688p
Black box: 16M Black Box
OSD: Beta Flight OSD ( AT7456E chip)
Barometer: selectable
USB Port : Type-C
DJI Air Unit connector: YES
Dual cameras: VES (Default: CAM1)
BEC Output: 5V output, the total current load is 3A, 12V output, the total current load is 2.5A

UART : 5 sets

12C: YES (SDA & SCL pads can be used for magnetometer)

LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: STM32F405 BLS

80A 30.5×30.5 4-in-1 ESC MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Power Input: 3-6S LiPo
Continuous Current: 80A* 4
Burst Current: 90A(10 seconds)
Current Sensor Scale: 200
ESC Protocol: DSHOT300/600
Firmware: Q_H_30 24k
Mounting: 30.5 x 30.5mm

F722 30.5×30.5 Flight Controller
MCU: STM32F722
IMU(Gyro): ICM42688p
Black box: 16M Black Box
OSD: Beta Flight OSD ( AT7456E chip)
Barometer: selectable
USB Port: Type-C
DJI Air Unit connector: YES
Dual cameras: VES (Default: CAM1)
BEC Output: 5V output, the total current load is 3A12V output, the total current load is 2.5A

UART : 5 sets

12C: YES (SDA & SCL pads can be used for magnetometer)

LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: STM32F722 BLS

80A 30.5×30.5 4-in-1 ESC MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Power Input: 3-6S LiPo
Continuous Current: 80A* 4
Burst Current: 90A(10 seconds)
Current Sensor Scale: 200
ESC Protocol: DSHOT300/600
Firmware: Q_H_30 24k
Mounting: 30.5 x 30.5mm

F405 30.5×30.5 Flight Controller
MCU: STM32F405
IMU(Gyro): ICM42688p
Black box: 16M Black Box
OSD: Beta Flight OSD ( AT7456E chip)
Barometer: selectable
USB Port: Type-C
DJI Air Unit connector: YES
Dual cameras: VES (Default: CAM1)
BEC Output: 5V output, the total current load is 3A, 12V output, the total current load is 2.5A

UART : 5 sets

12C: YES (SDA & SCL pads can be used for magnetometer)

LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: STM32F405 BLS

80A 30.5×30.5 4-in-1 ESC

MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Power Input: 3-8S LiPo
Continuous Current: 80A* 4
Burst Current: 100A(10 seconds)
Current Sensor Scale: 200
ESC Protocol: DSHOT300/600
Firmware: Q_H_30 24k
Mounting: 30.5 x 30.5mm

F722 30.5×30.5 Flig ht Controller
MCU: STM32F722
IMU(Gyro): ICM42688p
Black box: 16M Black Box
OSD: Beta F light OSD ( AT7456E chip)
Barometer: selectable
USB Port: Type-C
DJI Air Unit connector: YES
Dual cameras: VES (Default: CAM1)
BEC Output: 5V output, the total current load is 3A, 12V output, the total current load is 2.5A

UART: 5 sets

12C: YES (SDA & SCL pads can be used for magnetometer)

LED Pad: YES (Used for WS2812 LED control)
Buzzer Pad: YES
BOOT Button: YES
Firmware Target Name: STM32F722 BLS

80A 30.5×30.5 4-in-1 ESC

MCU: EFM8B821F16G
MOSFET: High performance MOSFET
Power Input: 3-8S LiPo
Continuous Current: 80A* 4
Burst Current: 100A(1 Oseconds)
Current Sensor Scale: 200
ESC Protocol: DSHOT300/600
Firmware: Q_H_30 24k
Mounting: 30.5 x 30.5mm

Send Inquiry for UAV & Drones Spare Parts

Company Name: Aegis Japan Co. Ltd.

Office Add: ACT Building, Room 410, 5-11-12 Toranomon, Minato-ku, Tokyo

Office Tel: +81-03-6416-4802

Inquiry Email: Tsuji.M@aegisjp.net

Please feel free to leave us a message with any advice or business inquiries. Every message will be read with care, and every inquiry will get a proper response. We promise to get back to you within 3 days—including weekends.

← Back

Multiple Frequency Flight Controller + ESC

Send Inquiry for UAV & Drones Spare Parts

Thank you for your response. ✨